Envoy Technical Practice Test

These questions are part of the practice quiz. Start practicing

• What is indicated by a waypoint with a circle around it on a STAR?
• What is the standard width of a runway?
• What is the speed limit under Class B airspace?
• What does the abbreviation 'CL RCLM' stand for in aviation lighting?
• What characterizes a warm front?
• What is the speed limit at 10,000 feet and above?
• What is the exception for descending below 100ft above the touchdown zone elevation using approach lights?
• What is considered a critical engine?
• What does LAHSO stand for in aviation?
• What are the primary types of fog that pilots should recognize?
• What happens during a hung start in jet engines?
• What does VFS stand for?
• What is one significant drawback associated with swept wings?
• Is it permissible to take off with visibility reported as 6/M/6?
• What do red terminating bars signify in approach lights?
• For pilots over 40 years old, how long is a first-class medical certificate valid?
• Which five documents are required before getting out to the plane?
• What is Vmc?
• What does the radar vector symbol on the arrival represent?
• What does the dollar sign ($) indicate on a METAR?
• What should a pilot do upon receiving flight clearance after requesting to deviate from a SID?
• What is the Decision Altitude (DA) for an LNAV/VNAV approach?
• How is the height of a control tower typically indicated?
• When is it permissible to descend below MDA/DA?
• What best describes the nature of weather associated with occluded fronts?
• Which of the following is a characteristic of Class C and D airports regarding speed restrictions?
• What are the three types of structural icing?
• At an altitude of 24,000 ft, when should you start your descent to reach 18,000 ft?
• What is the minimum distance to maintain from thunderstorms for safe flying?
• When does the critical Mach number occur?
• In aviation, what does the 'T' designation on a V airway signify?
• What are the dimensions of Class C airspace?
• When the visibility is 6/5/6, what determines if departure is allowed?
• What does a brown airport represent on a Jeppeson plate?
• According to FAR 121.481, what are the crew rest requirements?
• What is the standard vertical separation reduction implemented by RVSM?
• What is the role of an inverter in a power system?
• What describes a hung start in engine terminology?
• What is the significance of visibility in approach procedures?
• What is the primary function of a diode?
• Which fronts generally result in mixed weather conditions?
• Which regulation governs the limitations on flying after alcohol consumption?
• What speed is indicated by Vf?
• What is a requirement for aircraft under Reduced Vertical Separation Minimum (RVSM)?
• What can be expected when departing from an airport at high density altitude?
• Which of the following is a key advantage of AC power over DC power?
• What does Vfto stand for?
• What type of weather is typically found below the anvil of a thunderstorm?
• What is required for the 5/5/5 standard at DFW Airport?
• What is the process to calculate descent rate?
• What role does the diffuser have in the combustion process of a turbofan engine?
• What type of power does AC represent?
• What altitude does MEA guarantee?
• If RVR is reported as 6-M-6, what is the decision regarding departure?
• What is a common indication of engine failure during flight?
• What color are standard runway lights for the last 2,000 feet of runway?
• What defines a critical engine in aviation?
• What is the Minimum Decision Altitude (MDA) for a LOC approach?
• How long do you have to notify the FAA if you move?
• What does the N1 gauge indicate in an aircraft?
• What does a hot start in an aircraft engine indicate?
• What does a descent rate of 5 NM/min correspond to in terms of feet?
• What are the speed restrictions in Class B airspace above 10,000 feet?
• Which of the following altitudes do grid MORA ensure obstacle clearance over?
• Is visibility or ceiling controlling for whether or not we can shoot an approach?
• How are one-way preferred routes depicted on an airway?
• What are the three types of braking systems used in aircraft?
• How does spiraling slipstream affect an aircraft during flight?
• What does MEA ensure during navigation?
• Which color is used for the navigation light on the left wing?
• What does MOCA guarantee along the route to ensure safety?
• During which type of front does a mixture of warm and cold air result, causing variable weather conditions?
• What is the primary reason for the stipulation of flight limitations in part 121 operations?
• What is one method of entering a hold in aviation?
• What does it indicate when approach lights are visible?
• What is the implication of the 1-2-3 rule in determining the need for alternates?
• What does MEA stand for in aviation?
• What does MALSR lighting help facilitate for pilots?
• Which of the following statements best describes the combustion section of a turbofan engine?
• What does a magenta circle with "HS#" signify on a chart?
• Which of the following is essential for maintaining situational awareness while flying?
• What is the purpose of RVSM?
• Is an alternate airport required when the weather is forecasted to be 2000' OVC and 3SM visibility?
• How can a pilot determine how much runway is left during a landing roll out?
• What should a pilot check to determine runway remaining after a taxiway or intersection on an Airport Diagram?
• In a turbofan engine, which component is responsible for compressing air?
• Which is more controlling during flight operations: RVR or visibility in statute miles?
• How is field elevation determined at an airport?
• What underlying factor differentiates a cold front from an occluded front?
• What is the zipper line on an airport diagram used to indicate?
• Is it permissible to fly through a MOA?
• What does RVSM stand for?
• What is the required action if you lose your certificates?
• How often is the information in D-ATIS updated?
• What does MSA stand for in aviation terminology?
• What does a black star without a circle represent on a Standard Terminal Arrival Route (STAR)?
• What are the IFR fuel requirements for a flight?
• What is the initial action to take if the captain becomes unresponsive during a flight at FL350?
• What is the definition of accelerate start/stop distance?
• Which of the following is NOT a requirement for IFR fuel?
• If you only see the rabbit lights, can you proceed down to 100 feet above the touchdown zone?
• What occurs if there is a no light off condition in a jet engine?
• If a flight attendant occupies the pilot's seat, is oxygen required above flight level 410?
• What is the Minimum Decision Altitude (MDA) requirement for a VOR approach?
• What is the recommended rate of descent if you need to lose altitude rapidly at a groundspeed of 400 knots?
• Where can you find the localizer frequency on a Jeppesen chart?
• What is the width of a victor airway?
• What are the effects of icing on aircraft performance?
• When is a second alternate required for flight dispatch under Part 121?
• What device is used to convert power from AC to DC?
• When should an aircraft begin to slow down when entering a hold?
• How does accelerated slipstream benefit an aircraft during engine failure?
• After seeing approach lights on landing, what must you see next in order to safely land?
• What is required for a thunderstorm to form?
• What are the engine requirements for using an alternate airport?
• In a METAR, what does the 'T' group signify?
• What is the speed limit in Class D airspace below 2500 AGL within 4 nautical miles?
• What is a microburst?
• What occurs to the Airspeed Indicator (ASI) when a pitot tube is blocked but the drain hole is open?
• Under what condition can an aircraft begin takeoff from a displaced threshold?
• How is MOCA identified on a low enroute chart?
• What is the speed limit for aircraft below 10,000 feet in Mexico?
• What is virga?
• What is the MSA primarily centered around?
• When is an alternate landing airport required?
• If at 10,000 feet in Class Bravo airspace, must you slow to specific speed restrictions?
• Under what condition do you need a takeoff alternate?
• What is the significance of the number and degree symbol associated with the black arrow on airport diagrams?
• What is significant about the speed Vfto?
• What is a common reason pilots give for wanting to work with Envoy?
• What is the primary reason occluded fronts can lead to mixed weather conditions?
• If you want to descend from FL370 down to FL220, how far out do you start your descent?
• What is indicated by a requirement for "sign off" in an MEL procedure?
• What atmospheric condition is essential for forming thunderstorms?
• What colors represent an ALSF-2 approach lighting system?
• What is the primary function of the fan in a turbofan engine?
• What is required in a descent from 21,000 feet to a lower altitude in terms of rate of descent?
• Which statement about the ASI mechanism is true when facing a blocked pitot tube?
• What is the standard measure of electrical current?
• What does "D" signify on an airport diagram?
• Which statement is true about stationary fronts?
• If you have RVR reported as 6-5-6, can you depart?
• Which type of structural icing is considered the most dangerous?
• What is referred to as Vf in aviation contexts?
• What is the clearance provided by MORA in areas where the terrain is less than 5000 feet?
• When do the runway edge lights change color, and what colors do they turn?
• If you need to lose 8,000 feet of altitude, how far out should you begin your descent at a groundspeed of 400 knots?
• What type of airports are indicated by brown colors on an IFR chart?
• What occurs when torque is present during flight?
• If an aircraft breaks an item on the MEL at an outstation, what should you do if the captain insists on continuing the flight?
• If the weather is reported as 100' OVC, what is the main concern?
• Have you ever flown a DP? What does DP refer to in aviation?
• Which of the following describes the stages of a thunderstorm?
• What occurs in the turbine section of a turbofan engine?
• What type of weather is typically associated with a stationary front?
• What does MCA stand for?
• What happens to the airspeed indication when a pitot tube is blocked and the drain hole is also blocked?
• During takeoff, how does high humidity impact performance?
• What is a primary consequence of Mach tuck?
• What colors do civil airports typically use for their flashing lights?
• What is the significance of the '29.92' in an altimeter reading?
• What are the oxygen requirements for Part 91?
• During a stationary front, how do the weather conditions typically change?
• What is the visibility requirement for takeoff under part 121 for 1-2 engine aircraft?
• What commonly causes circuit breakers to trip?
• How does an airfoil generate lift?
• What category for minimum visibility is required for Envoy jets on an approach?
• Are thrust reversers considered in the stopping distance calculation before reaching V1?
• What is Bernoulli's principle in relation to fluid dynamics?
• What does MSA guarantee in terms of altitude?
• What does V1 represent in aviation terminology?
• What does the acronym MEA stand for in aviation?
• How do the flaps operate on the current aircraft and what are the possible degrees?
• What is the side view of an approach plate called?
• When is the ILS critical area hold short requirement in effect?
• When approaching 20,000 feet from 35,000 feet at 300 knots, how many miles out should you begin your descent?
• What typically causes a no light off engine malfunction?
• What does the reporting of RVR 6/6/6 indicate during takeoff?
• On a Jepp chart, what signifies the highest obstacle?
• What should you do if the weather goes below minimums and you are already inside the FAF?
• What does Vr represent in takeoff performance?
• What happens when you approach a fly-over waypoint?
• What is the top section of the Jeppeson page called?
• What does MOCA stand for in aviation regulations?
• What is the maximum speed allowed while holding below 6,000 feet?
• What does an airway bypass indicate on a Jepp chart?
• What does CDL stand for in aviation terminology related to airworthiness?
• What is the purpose of MRA in aviation?
• What is the purpose of an accessory gearbox in an aircraft engine?
• What is the main function of the Minimum Crossing Altitude (MCA)?
• How can you determine if a runway has a displaced threshold?
• What is the maximum speed allowed in holding above 14,000 feet?
• What is the function of an MEL in aviation operations?
• Why does a swept wing design reduce the effective airspeed of the wingtip?
• What components are part of the MALSR lighting system?
• What is the standard procedure when encountering turbulence during departure?
• What is the main purpose of flaps in an aircraft?
• How far out does the 200kt speed restriction extend from Class C and D airports?
• What is the speed limit below 10,000 feet?
• With respect to air masses, what occurs in a stationary front?
• With RVR reported as 6-6-6, what is the status for departure?
• What is the function of the ITT gauge?
• If departing Runway 36L using the NELYN FIVE departure, what is critical to review?
• What is the primary use of transformers in electrical systems?
• On a Jeppesen enroute chart, what does the 'T' signify in an altitude like 2500T?
• When can a pilot continue below MDA/DA if the runway environment is in sight?
• What characterizes a cold front?
• What is the main difference between fly-over and fly-by waypoints?
• Can a low visibility takeoff be performed with RVR missing or below minima?
• What does the N2 gauge measure?
• Which statement is true regarding the operation of a Standard Instrument Departure (SID)?
• Which altitude measurement systems are necessary for RVSM compliance?
• Is a battery classified as AC or DC?
• Can you safely overfly a thunderstorm?
• Which of the following best describes direct current (DC)?
• What are the dimensions of Class D airspace?
• What device is commonly used to counteract Dutch roll in modern aircraft?
• What is the second part of the Jeppeson plate typically referred to as?
• What does a volt measure?
• What distinguishes a fuse from a circuit breaker?
• At what rate should you descend to reach 20,000 feet from 35,000 feet?
• How can you identify a movement area at an airport?
• If you descend from FL290 to 11,000 without resetting your altimeter, how will it affect your altitude reading?
• On an IFR plate, what does a green airport indicate?
• What documentation is required for an aircraft flying into Mexico?
• Why is it essential to reset your altimeter before descent during a flight?
• Which types of drag are primarily recognized in aerodynamics?
• Where can takeoff minimums be found?
• In what form must the flight release specify an alternate airport?
• What should a pilot do if ATC informs them that minimums are below the required for the approach while they are inbound on the final approach segment?
• What happens when a fuse in a circuit blows?
• How is a restricted area different from a prohibited area?
• How is electrical flow measured in a circuit?
• What should be observed to assess the weight of weather conditions in terms of visibility during approach?
• How long are pilot certificates valid for?
• Where can you locate the distances between NAVAIDs on an Enroute Chart?
• In the context of approach plates, what does IAP stand for?
• What is the best method to ensure successful communication of changes during a flight operation?
• What is the lowest visibility requirement for takeoff under part 91?
• What should a pilot do first if both pilots are incapacitated in flight?
• What are the types of braking systems that can be applied in flight?
• Above what altitude does the holding leg time increase to 1.5 minutes?
• What is the speed restriction in Class B airspace below 10,000 feet?
• In aviation, what is the significance of the highest point of any runway at an airport?
• What is the primary consequence of icing on an airfoil?
• Why is the alternator's voltage higher than the battery's?
• What is the primary function of the OROCA?
• At what speed should one climb with one engine inoperative?
• What is a displaced threshold?
• What is the essential principle of Newton's third law of motion?
• Which type of front occurs when a fast-moving cold front overtakes a slower-moving warm front?
• What rate of descent should be maintained with a groundspeed of 500 knots?
• Why is the landing rollout longer at higher altitude airports?
• On a Jeppesen chart, what does a blue airport indicate?
• Which of the following describes how you determine if a low visibility takeoff can be performed?
• What is the maximum altitude you can fly in controlled airspace without ATC clearance?
• What are the supplemental oxygen requirements for unpressurized aircraft?
• What is the missing element in a clearance when using the CRAFT method?
• What is the typical landing rollout impacted by, at higher altitude airports?
• Can you continue to land if the visibility is below minimums?
• How is the decision made regarding the Minimum Altitude Point (MAP) during a non-precision approach without a DME?
• If you are at 21,000 feet and need to descend to 11,000 feet, and you are traveling at 300 knots, how far in advance should you begin your descent?
• What happens to the air masses at a stationary front?
• What does bleed air in an aircraft engine primarily come from?
• What does Grid MORA stand for?
• On an LNAV approach, what is the Minimum Decision Altitude (MDA)?
• To calculate descent distance, what factor is multiplied by the altitude you need to descend?
• What procedures should be followed in a lost communications scenario?
• What does the term 'marginal' refer to in aviation weather conditions?
• How is a displaced threshold depicted on an airport chart?
• What altitude alerting system is required for RVSM compliance?
• What type of flight plan is required if you exit the ADIZ on the coast?
• What color are the navigation lights on the right wing?
• What does V1 represent in aviation?
• What is Mach tuck?
• What information is coupled with runway lighting requirements?
• What is the speed defined as V2?
• What is the maximum leg time for holding altitude below 14,000 feet MSL?
• What does the black arrow mark on an airport diagram indicate?
• In terms of movement, how does an occluded front behave?
• What does "descend via" mean in an approach procedure?
• How far should an aircraft maintain distance from thunderstorms?
• Class B airspace typically has what general altitude limit?
• What role does the flight director play in the cockpit?
• According to the 1-2-3 rule, when should you check the weather conditions?
• What colors are typically used for navigation lights on an aircraft?
• What is the maximum airspeed restriction inside Class B airspace on the Standard Instrument Departure (SID)?
• What happens to the Essential Bus when the battery master switch is turned on?
• What factors contribute to making an engine critical?
• What does a communication changeover point look like on an airport diagram?
• What must happen if the RVR drops below minimums inside the FAF?
• What ground frequency should you use to determine position on the surface?
• Which of these is NOT a requirement for flight into Mexico?
• Why is clear icing considered particularly hazardous?
• What can be used to manage the timing during an approach without DME?
• Is it permissible to take off with a configuration of M/6/6?
• What regulation governs takeoff and landing criteria in IFR for pilots?
• What phenomenon is referred to as coffin corner?
• What type of airspace is DFW classified as?
• What is the purpose of the penalty box at O'Hare International Airport (ORD)?
• What is the holding speed at or below 6,000' MSL?
• How does density altitude affect landing distance?
• What does the acronym ARROW stand for regarding essential aircraft documents?
• What aids in the visibility for landing under adverse conditions?
• What are the flight limitations for part 121 in terms of daily, weekly, monthly, and yearly hours?
• What does V3 indicate in flight operations?
• At what altitude must aircraft adhere to Mach 1 speed limit?
• What velocity is used to calculate the descent rate in the example given?
• What factors affect the critical engine during flight operations?
• What is measured to ensure navigation reception along the entire route when using MEA?
• What does P factor describe in terms of propeller dynamics?
• Which of the following describes 'P Factor'?
• How is 600-degree air from the engines cooled for cabin comfort?
• What does MAA stand for in the context of aviation?
• What do hotspots on a aeronautical chart look like?
• What does it mean if a pilot sees "S" next to a runway on a chart?
• How do you convert Celsius to Fahrenheit?
• What is the primary advantage of a swept wing design?
• What is the radius of an MSA?
• What should you do if you encounter a microburst?
• What kind of weather can be expected during the formation of an occluded front?
• If the descent rate is maintained at 2,000 feet per minute, how many feet will you lose in one minute?
• What is the main difference between a generator and an alternator?
• What is the typical altitude limit of controlled airspace?
• What is the typical descent rate if flying at a high groundspeed?
• What does MEL stand for in aviation terms?
• What does MAA ensure regarding navigational aids?
• Are there any hot spots at the DFW airport?
• What does Vref refer to in aviation?
• What does MORA stand for and what does it provide?
• At what altitudes does RVSM airspace begin and end?
• What is the purpose of Runway Centerline Lights?
• When are you considered established inbound?
• What does FAR 91.175 specify?
• What characterizes a stationary front in meteorology?
• In D-ATIS, what does the letter D stand for?
• What do the runway edge lights turn to when reaching the last 1000 feet?
• How is the miles needed to descend calculated when approaching from 35,000 feet?
• What is RVSM airspace?
• At what elevation change within a distance of 10 nautical miles does mountainous terrain begin?
• At what altitude must you descend to from FL210 within 25NM maintaining a GS of 300 kts?
• What are the cloud clearance requirements in D airspace?
• What speed restriction applies below 10,000 feet but above Class B airspace corridors?
• What is the fuel requirement if a second alternate is required?
• With a ground speed of 300 knots, how long will it take to descend from 21,000 feet to 11,000 feet at a rate of 2,000 feet per minute?
• What is the function of a relay in an electrical circuit?
• What is the indicated relationship between speed and pressure according to Bernoulli's principle?
• What is the top-down view on an Approach chart commonly known as?
• What is the purpose of a white box preceding a runway?
• How does a carburetor function in an aircraft?
• What happens when an occluded front forms?
• In swept wing aircraft, what initiates a Dutch roll?
• Where can one typically find the top of climb indicated in a Standard Instrument Departure (SID)?
• What is V2 in aviation terms?
• What is the visual representation of an airport beacon?
• What do the red numbers on an airway indicate?
• What is the impact of accelerated slipstream if the critical engine fails?
• What determines the field elevation for an airport?
• To calculate time between two VORs, what formula should be used?
• In aviation, what is the purpose of a Minimum Equipment List (MEL)?
• Which of the following conditions could indicate a hazardous situation in aviation?
• What is the definition of accelerate stop distance?
• When should passengers don their oxygen masks if an emergency occurs in flight?
• What information source typically indicates the available runway during a land and hold short procedure?
• What is the primary function of an alternator in a power system?
• How can you identify a soft field on a Jepp chart?
• Which of the following is a known jet engine start malfunction?
• How does torque impact an aircraft when the left engine fails?
• What does VDP stand for in aviation terminology?